SABINE NAV4802-DC-U Instrucciones de operaciones descargar pdf (Pagina 20)

General System Parameters

· FREQ MODE: Selects the frequency control mode for EQ

and crossover ﬁlters. The coarse adjustment is 36 steps/oc-

tave; choose All Frequencies (1 Hz resolution) for ﬁne adjust-

ments.

· DELAY UNIT: ms (milliseconds), ft (feet), or m (meters).

Communications

· PORT: Choose control port. RS232/USB for direct connec-

tion to a computer, or CAT-5 for Ethernet.

· BAUD: Choose the baud rate to match your serial port when connecting via RS232 or USB. The

values are 1200, 2400, 4800, 9600, 19200, 38400, 57600, or 115200.

· DEVICE#: Assigns the device ID from 1 to 16. Assigning ID numbers is required when you are

creating a network of more than one Navigator.

Panel

Choose how your Navigator wil interact with the NACRC-100

Wall Panel Remote. For a complete look at using this with

your Navigator please see section XXX on pageXX

· PANEL MODE: Master or Slave. The ﬁrst Navigator to be controlled with multiple wall pales should

be set to Master. The next one is set to Slave. You can control a maximum of 2 Navigators with one

wall pane.

· # OF PANELS: 1 to 32. Choose the number of wall panels that control this Navigator. The maximum

is 32.

Se c t i o n fi V e : op e r a t i n g t h e na V i g a t o r

NAV4802 & NAV8802

NAV240, 360

NAV4802 & NAV8802

NAV240, 360

NAV4802 & NAV8802

NAV240, 360

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 45 46

Sin comentarios

SABINE NAV4802-DC-U Instrucciones de operaciones Pagina 20